MIL-STD-1310H(NAVY) APPENDIX B
ELECTRICAL SAFETY AND PROTECTION FOR COTS AND NDI EQUIPMENT B.1. SCOPE B.1.1 Scope. The purpose of this appendix is to ensure that all electrically-powered COTS/NDI equipment procured for shipboard use is: (1) in compliance with electrical shock hazard protection requirements when procured outside normal procurement channels, and (2) power line surge protected when applicable as mobile- transportable equipment is operated on ship's power. Compliance with the electrical shock hazard protection requirements of 4.4 and 5.7 will be certified upon acceptance when this standard is invoked in the procurement specifications for COTS/NDI equipment procured by government contract and issued from stock. However, portable and mobile transportable electrical COTS/NDI equipment not conforming to this standard's electrical safety requirements might be procured for shipboard use on the open market. In this case, the COTS/NDI may not have been tested to this standard's requirements; the procuring activity shall determine if they have been met. This Appendix is a mandatory part of the standard. The information contained herein is intended for compliance. B.1.2 Implementation. This appendix requires the procuring activity to determine whether electrically-powered COTS/NDI equipment is suitable for shipboard use, and provides guidelines for modification of the equipment or ship's power, as necessary, to bring them into compliance with the established shipboard electrical shock hazard and power line surge protection requirements. B.1.3 Application. These data in this standard specifically address portable and mobile-transportable COTS/NDI equipment and rack mounted or enclosure mounted COTS/NDI equipment, such as; tools, test equipment, desktop and laptop computers and peripherals, etc., onboard for official use. It may also be applicable to personal equipage when used aboard ship. Authorization for use of personal electrical/electronic equipment onboard is discussed in detail in Naval Ships Technical Manual (NSTM) Chapter 300. B.2 APPLICABLE DOCUMENTS B.2.1 General. The documents listed in this section are specified in sections 3 or 4 of this appendix. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this appendix, whether or not they are listed. B.2.2 Government documents. B.2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified therein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-882 - Standard Practice for System Safety (Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) B.2.2.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. B.2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. |
||||
30
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business