MIL-STD-1310H(NAVY) APPENDIX C
NONMETALLIC HULL SHIPS CABLE GROUND SYSTEM FABRICATION
C.1 SCOPE
C.1.1 Scope. The cable ground system is the common reference (earth potential) ground plane for nonmetallic hull ships. This appendix provides information on the fabrication of cable ground systems on nonmetallic hull ships. This appendix is a mandatory part of the standard. The information contained herein is intended for compliance.
C.1.2 Primary common ground reference; systems and shielded spaces. Separate branches of the multi-tree ground plane shall be directly connected from the ground plate (see figure C-1) to: (1) all shielded spaces; (2) the metallic mast; (3) the ship service and ship service emergency switchboards, and (4) the ship service and ship service emergency generator sets.
C.1.3 Common ground reference outside shielded spaces. Separate branches of the cable ground plane shall provide the common ground reference required for operation of electrical and electronic equipment located outside shielded spaces and for bonding of metallic items located in the topside EME when required for hull-generated EMI control.
C.1.4 Common ground reference inside shielded spaces. Separate branches of the cable ground plane may be required to directly connect equipment utilizing electrical power inside shielded spaces in the event the short circuit current capacity of the enclosure, and the primary branch, trunks, and ground plate connection points thereto would be exceeded.
C.1.5 Electrical safety ground for shock hazard protection. Separate branches of the cable ground plane may be required to provide a dedicated connection for electrical and electronic equipment to the ground plate for personnel protection.
C.2 APPLICABLE DOCUMENTS
C.2.1 General. The documents listed in this section are specified in sections 3, 4, 5, or 6 of this appendix. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, 5, or 6 of this appendix, whether or not they are listed.
C.2.2 Government documents.
C.2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified therein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-907 - Antiseize Thread Compound, High Temperature
MIL-DTL-24643 - Cables and Cords, Electric, Low Smoke, for Shipboard Use, General
Specification for
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094)
C.2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
33
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business